Scrap Fabric Owl Soft Toy – Free Pattern Templates & Tutorial

I made quite a few of these Softie Fabric Owls for the little kids on my Christmas list last year.

They are easy to make and a great sewing project for beginners so I thought I’d do a tutorial and include the free template for cutting the pieces out (see below to get yours!)

NOTE: Printable instructions and a video tutorial are at the end of the post.

This post was originally published on our sister site Upcycle My Stuff

Materials Needed – Fabric Owl

Fabric Cutting Sizes

These are rough guides for the size of scrap fabric you will need in order to cut out the free pattern template pieces at full size. NOTE: You can easily make different size owls by scaling the paper pattern template on your printer. The cutting instructions below are for 100% scale.

You can also make the fabric pieces below out of more than one piece of fabric or use ‘made fabric’ like I did for the Owl in the video tutorial below.

  • Two pieces of cotton fabric approx 10″ x 8″ – for the front piece and back piece of the owl
  • Two pieces of cotton fabric approx 6.5″ x 2.5″ (for the wings/side body pieces)
  • Two pieces of cotton fabric approx 3″ x 3″ (for the eye circles)
  • 1 piece of cotton fabric approx 3″ x 2.5″ (for the beak piece)

Other Materials Needed

Video Tutorial: Scrap Fabric Owl

Apologies for the lighting in some of the photos below – not my best!

Step 1: Prepare your Templates

Print out the free templates (fill in your email below for an instant download file) at 100% scale. Use the cutting lines (seam allowance included) to cut out the shapes.

If you plan on making more than one fabric owl I would suggest using the paper templates to transfer the shapes to cardboard as it makes it much easier to accurately trace the shapes on your fabric for cutting.

scrap fabric owl soft toy
Photo: Scrap Fabric Love

Step 2: Cut out your Fabric Pieces

scrap fabric owl soft toy
Photo: Scrap Fabric Love

Use your paper or cardboard templates to trace the shape on the wrong side of your fabric and then cut out with sharp fabric scissors.

NOTE: Only one wing shape is included in the templates so you need to flip it and cut one shape on each size so that the side body pieces look like wings that mirror each other (see photos)!

scrap fabric owl soft toy
Photo: Scrap Fabric Love
scrap fabric owl soft toy
Photo: Scrap Fabric Love

I have made versions of these owls with both pieces of leftover fabric and pieces of fabric I ‘made’ using much smaller scraps.

You can get creative and piece together your fabric pieces from any number of scraps to get a piece the right size to cut your template from. The scrappier the better!

Step 3: Preparing your Heat n’ Bond

scrap fabric owl soft toy
Photo: Scrap Fabric Love

Next, you want to place your wings, beak and eye circles on the paper side of your heat n’ bond.

Outline them roughly with a pen or pencil and then cut out your heat n’ bond about a 1/4″ inside your drawn line.

Place the mesh looking side of the heat n’ bond on the wrong side of your fabric pieces and fuse in place with an iron. You only need to iron it for a few seconds for it to adhere.

More Sewing Projects you might like:

Step 4: Fusing your Shapes in Place

scrap fabric owl soft toy
Photo: Scrap Fabric Love

Choose which of the two fabric pieces you cut out for the owl’s body will be the front and lay it right side up on your ironing surface.

Lay out your wings, beak and eyes and position them how you like them.

Don’t worry if your wings overlap the side of the body a bit. Just look at the centre and make sure it looks vaguely like owl wings! You can trim any excess off after he’s been sewn together.

scrap fabric owl soft toy
Photo: Scrap Fabric Love

Once you are happy with your layout peel the paper backing off of your heat n’ bond and place it back down on top of your owl body. Fuse in place with your iron.

scrap fabric owl soft toy
Photo: Scrap Fabric Love

I usually do the wings first and then peel the paper off of the eyes and beak and fuse the face down all at once.

Step 5: Raw Edge Applique

scrap fabric owl soft toy
Photo: Scrap Fabric Love

Fusibles like Heat n’ Bond are not like fabric glue – they are not something you can rely on to hold your shapes in place indefinitely. So we need to secure the edges of our shapes with some ‘raw edge applique’ – which just means we are stitching over the raw edge rather than turning it under first.

You can use either a blanket stitch or a zig-zag stitch for this. I’ve used both with this pattern and the owl’s turn out cute either way. (See image at the end of this blog post – the brown owl has blanket stitch and the pink owl has zig zag stitch)

Blanket stitch is a bit slower to do but tends to look more polished and zig zag is much faster but has a bit more of a homemade patchwork look.

There are a lot of curves in these pieces so whichever stitch you are using just take your time and stop to pivot and raise your presser foot when needed to reposition your owl.

Sew all the way around the edges of your eyes and beak and along the inner edge of your wings. If the outer edge of your wings will be caught up in the seam you don’t need to stitch over them at this stage. If they are further to the middle then go ahead and stitch all the way around.

Step 6: Adding Soft Toy Eyes

scrap fabric owl soft toy
Photo: Scrap Fabric Love

I have a kit with different sized soft toy eyes that I use for these owls but if you don’t have any you can use a black button for an eye just as easily.

For both methods, start by marking the position of the eyes with a friction pen. I’ve made these owls both with the eyes dead centre and 3/4 of the way down. Both look cute so pick your favourite!

For soft toy eyes, you will now use your awl tool to poke a hole right through the fabric where you made your pen marks. Make the hole just big enough to fit your desired eye base through and then attach the back fastener.

For button eyes, just hand sew in place over your pen marks.

Step 7: Sewing the Owl Together

Nearly finished!

scrap fabric owl soft toy
Photo: Scrap Fabric Love

Place your two owl body pieces right side together and sew all the way around the edge with a 1/4″ seam allowance leaving a small opening at the bottom of the owl for turning (3″ should be sufficient).

Step 8: Turn your Owl Right Side Out

Before you turn your owl right side out go around and trim any excess fabric from around the edges of your owl.

Then clip the tips of the ears (without cutting through your stitch line!) and make some small notches in the seam allowance where the ears meet the body and along the curved edges. This is so the seams sit nicer when you turn it right side out.

Turn your owl right side out using a chopstick or thin paintbrush handle end to get gently poke the ears until the tips are out properly.

Step 9: Stuffing & Closing

The last steps are to stuff your owl with your soft toy stuffing. I use the paintbrush handle or chopstick again at this stage to push the stuffing into the ears and distribute it evenly.

When he’s good and stuffed turn in the raw edges of your turning gap and hand stitch the gap closed with a coordinating thread.

Finished Scrap Fabric Owl Soft Toy!

scrap fabric owl soft toy
Photo: Scrap Fabric Love

These cute owls are a great homemade gift idea for a young child and I think it’s a great project for beginner sewers looking to make something quick and easy. It’s so satisfying to see one of these owl softies come to life so fast!

If you like’d this project don’t forget to Pin it!

free owl templates